The first screen that pops up should look like this. Of course you can do it the old fashion way and burn the ISO to a disc. You can make your USB bootable by using this tool: . Another nice way is to boot it from a USB thumb drive. Depending on your hardware you should mount the ISO using iLo/iDRAC/etc.
Vmware Esxi 5.5 License Agreement AndVmware Esxi 5.5 Install To ItThe installation of ESXi is very small, you could use a thumb drive and install to it. You will have already configured your hard drives with a RAID if applicable (if not go do that and start over). Hit Enter:Accept the license agreement and hit F11:Here you select where you want to install ESXi.
Hit Enter to reboot:Here is what the ESXi screen looks like after booting. Hit F11:Installation is complete. Hit Enter:ESXi is ready to begin the installation. Vmware Esxi 5.5 Password That WasHit space bar on the vmnics that you want to use, when finished hit Enter:Now scroll down to IP Configuration, hit Enter:In my lab I want to set a static IP address, once finished hit Enter:If you are not using IPv6, go to IPv6 Configuration and disable it:Now go to DNS Configuration and hit Enter:Set your DNS information and host name, hit Enter:Now hit ESC to exit, you will be prompted to reboot thehost for the changed to take affect. This screen might be different depending on your environment. Hit F2 to bring up the login menu:Enter the password that was set during the install, hit Enter:Scroll down to Configure Management Network, hit Enter:This is where you can select what uplinks the management network has.
0 Comments
Leave a Reply. |
AuthorAngie ArchivesCategories |